Ajax FireProtect 2 AC (Heat/Smoke/CO) White

£105.00 Excl. VAT

A mains powered smoke, heat and carbon monoxide detector with sealed battery backup, interlinked wirelessly with your Ajax alarm for whole home alerts.

SKU: AJAX-FIREPROTECT-2-AC Category:
Trustpilot

Description

The Ajax FireProtect 2 AC is a mains powered fire and carbon monoxide detector that combines smoke, heat and CO sensing in one unit. It connects to a 230V supply with a sealed backup battery that keeps it working during a power cut, and links wirelessly to the rest of your Ajax system so every detector sounds together and you are alerted on your phone.

This listing is for the Ajax FireProtect 2 AC (Heat/Smoke/CO) in White, professionally supplied and installed by CCTV Aware, Ajax Certified Specialists covering Essex, London, Hertfordshire, and Kent.

Three sensors in one detector

A dual spectrum optical smoke sensor uses blue and infrared LEDs, and the HazeFlow 2 algorithm, to tell real smoke apart from steam and cooking fumes. The smoke chamber is dustproof and insect resistant, so it needs no routine cleaning. Two A1R class thermistors outside the enclosure trigger if the temperature passes 64°C or rises by 10°C within a minute. The chemical CO sensor is rated for 10 years and alarms at 50 ppm within 90 minutes, 100 ppm within 40 minutes, or 300 ppm within 3 minutes.

Certified to UK and European standards

The FireProtect 2 AC meets BS EN 14604 for smoke alarms, EN 54-5 class A1R for heat detection and BS EN 50291-1 for carbon monoxide detection, making it a strong choice where mains powered, interlinked alarms are required.

Interlinked across the whole property

Connected to an Ajax hub, one alarm can set off up to 200 detectors within 20 seconds. If the hub is unavailable, detectors communicate directly over Jeweller to trigger up to 50 units in under a minute, and the detector can also work standalone. The 85 dB siren uses distinct tones for fire, CO, faults, low battery and end of life.

Quick, tidy installation

The SmartBracket mounting panel uses lever operated WAGO connectors, so the detector can be wired without opening the enclosure and rotated in 90 degree steps after fitting. Pairing takes seconds by scanning a QR code in the Ajax app, and settings can be changed remotely without a site visit. The Jeweller link to your Ajax Hub 2 reaches up to 1,700 metres in open space.

Key specifications

SensorsOptical smoke (dual spectrum), heat (2 x A1R thermistors), carbon monoxide
StandardsBS EN 14604, EN 54-5 (A1R), BS EN 50291-1
Power110 to 240V AC mains, sealed lithium backup battery
Siren85 dB at 3 m
InterconnectionUp to 200 detectors via hub, up to 50 directly
Jeweller rangeUp to 1,700 m in open space
Operating temperature0°C to +50°C
Dimensions122 x 122 x 54 mm
Weight318 g

What you receive when you order

  • 1 x Ajax FireProtect 2 AC (Heat/Smoke/CO) in White
  • SmartBracket mounting panel
  • 2 x WAGO 221 terminal connectors
  • Professional installation by CCTV Aware

If you need mains powered, interlinked detection for a new build, rental property or renovation, get in touch and we will plan the right layout for you.

For full technical specifications, visit the Ajax FireProtect 2 AC product page on the Ajax Systems website.

Yes. We can install CCTV as discreetly as possible, depending on your property and coverage requirements.

Options can include:

  • Compact camera styles
  • Higher mounting positions where appropriate
  • Tidy cable routes and minimal visible trunking
  • Recorder installed out of sight in a secure location

If your priority is a low profile install, tell us at quotation stage so we can recommend the best approach for your layout.

The recorder (DVR or NVR) is normally installed indoors in a secure, sensible location with good ventilation.

Common locations include:

  • A cupboard or utility area
  • An office
  • A comms cabinet or rack

We typically install it near your internet router if you want remote viewing on your phone, as it needs a network connection.

If you have a preferred location, let us know during the quote stage and we will advise if it is suitable.

In many cases, yes.

Whether you can add cameras later depends on:

  • How many spare channels your recorder has
  • Whether the recorder has spare capacity on the hard drive
  • Whether cable routes and power options are available

If you think you might expand in future, we can design the system with this in mind, for example fitting an 8 channel recorder for a 4 camera install, or leaving suitable cable routes.

Yes. Your CCTV system records locally to the recorder (DVR or NVR). If your broadband drops out, it will still continue recording as normal.

What you will lose during an internet outage is:

  • Remote viewing from your phone or PC
  • Push notifications and alerts to your phone
  • Remote playback access

Once the internet comes back online, remote viewing and notifications will resume.

Recording time, also known as retention, depends on a few things:

  • Number of cameras
  • Camera resolution (for example 6MP, 8MP)
  • Recording mode (continuous 24/7, motion only, or a mix)
  • Frame rate and bitrate settings
  • The hard drive size fitted to your recorder

As a rough guide, higher resolution and 24/7 recording will reduce retention. Motion based recording can greatly increase retention, but it depends on how busy the scene is.

We generally specify our systems to give you a retention period of 21 days.

Hikvision CCTV systems can support a multitude of notifications that can be configured to perform various actions from alerting your mobile phone to activating a parking barrier.

That being said, this guide talks about the three main notification options.

Motion Detection
In its simplest form, this is when an object enters the camera view area and a motion is triggered.

Line Crossing
An invisible line can be drawn on a particular area of your camera view area, for example the driveway threshold or the garden boundary. Once an object crosses over that line (from either way) - a line crossing is triggered.

Intrusion Detection
This is similar to Motion Detection but more specific. With Intrusion Detection an invisible quadrilateral shape can be drawn on a particular area of your camera view, for example directly outside your front door. Once an object then enters that area - an intrusion detection is triggered.

With all of the options above, the system is unable to detect the difference between a human, pet or other object. This can often result in false notifications being triggered to the user. In addition to this, if the system generates the notification - it is then down to your broadband provider (router) to push the notification out to your mobile device. This will often fail if your provider is not quite up to scratch or your mobile phone is currently in an area with poor coverage.

Because of this, we do not provide support on notifications that are sent to your mobile device.

Unfortunately, no.

We are authorised and Certified by Hikvision UK to supply and install their products.

We are unable to provide you with an installation only service if you have purchased your own equipment as we are not insured to do so.

In addition to this, we would be unable to provide you with our comprehensive support and warranty for three years that our systems come with.

If you are considering purchasing your own equipment, please consider our guide here : Pitfalls of buying Hikvision from eBay or Amazon

Our prices are fixed, so the cost of your installation will really depend on the amount of cameras you require and the type of system.

You can obtain a free online quotation by visiting our "Online System Builder"

You can see the differences between the systems by reading  "Our IP Systems Explained"

You can learn about our 'Fixed Prices, No Surprises' policy by reading our "Simple as 2, 3, 4"